1. Ruijie JaCS 2.0 provides a brand new UI layout. It consists of three parts: Dashboard, Project, and AI Assistant.
(1) Dashboard: The Dashboard provides three tabs: All Projects, All Devices, and Alarms. In this page, you can check the project list, the information of all devices and alarm information. Also, you can manage projects, project groups, AP configuration templates and upgrade policies.
All Projects: Devices are managed based on projects. Three tabs are available on this page, including My Created, My Received and My Shared. This page provides some basic operations for you to manage projects, such as searching projects by names, sharing projects to another tenant, handing over projects to another tenant and deleting projects. Groups with devices in the Ruijie JaCS 1.0 will be updated to projects in Ruijie JaCS 2.0, while those without devices will remain as groups. Groups serve as the upper layer of projects for logical classification.
All Devices: In this tab, you can view information for all devices across all created projects. Devices can be displayed by type. Also, you can perform operations on this tab, such as upgrading a device, accessing the eWeb of a device, and deleting a device.
Alarms: The alarm function of Ruijie JaCS 2.0 remains the same with that of Ruijie JaCS 1.0.
Project Management: Ruijie JaCS 2.0 supports creating a single project or creating projects in batches.
Group Management: Ruijie JaCS 2.0 supports viewing the group tree and project list created under each group. You can manage both groups and projects.
AP Template Management：In Ruijie JaCS 2.0, the access entry of the AP template management is on the Dashboard page. After navigating to Project > Device Config > AP Template, you can check the AP template that has been applied to the selected project.
Upgrade Policy: The upgrade policy of Ruijie JaCS 2.0 is the almost same as that of Ruijie JaCS 1.0. The only difference is that upgrade policies are applicable only to projects not project groups.
(2) Project: After entering the Project interface, you can manage all devices in a selected project, including checking device topology and device list, configuring devices, etc.
(3) AI Assistant: Ruijie JaCS 2.0 carries an AI assistant, which is used for answering queries related to device information.
2. Ruijie JaCS 2.0 provides an independent management page for ONU devices.
3. Ruijie JaCS 2.0 supports managing Wi-Fi 7 devices RG-MA3511-AC and RG-MA3511-PE. AP templates can be used for configuring devices of these two models. Additionally, you can connect them to Ruijie JaCS via scanning their QR codes.
4. Ruijie JaCS 2.0 supports configuring RG-EG5210-JP via importing configuration files (not require devices to be online), and exporting the configuration file via an IPv6 pathway.
Ruijie JaCS 1.0 displays the traffic statistics of a first-level group in the Network Report page, while the Ruijie JaCS 2.0 displays the traffic statistics of a selected project.
N/A
No. | Module | Description |
1 | Device | Up to 200 devices can be imported each time. To import more than 300 devices, users need to do it in batches. |
2 | Configuration | Configurations of up to 200 devices can be imported each time. To import configurations of over 200 devices, users need to do it in batches. |
3 | EXCEL template | For Excel template, only the XLS format is supported. |
4 | SSID | SSIDs can be made up of numbers, English letters, and “-“. |
5 | Custom excel template | In an Excel customized template, A to Z columns and 1 to 15 rows are supported. |
6 | AP | Account-based policies may fail on some models, such as AP680(CD), where they are disabled by default. In this case, users need to batch apply from the Cloud the web-auth acct-update-interval 1 command to enable those policies. |
7 | SSID reverse sync | The Cloud does not support SSIDs containing special characters. If set on end devices, such SSIDs will fail to be delivered, after synchronization, by the Could. |
8 | 00000JAPAN Wi-Fi | In the Apartment Scenario, if the device goes offline after 00000JAPAN Wi-Fi is enabled, and then goes online after 00000JAPAN Wi-Fi disabled, Cloud will not re-configure the Wi-Fi settings on device. You need to clear 00000JAPAN Wi-Fi configuration manually. |
9 |
AP | In Non-apartment Scenario, please clear the configuration on devices except AP180 before bring them online; otherwise, the configuration on devices may be conflict with that on Cloud, and the client may not be able to access the Internet. |
10 | AP | In Non-apartment Scenario, if the working mode (bridge mode or routing mode) of AP180 is different from that on Cloud, the client may not be able to access the Internet. |
11 |
TOPOLOGY | 1. Only devices connected to the downlink port of the switch can be detected. 2. Only EG5210-JP, XS-1930J series switches and APs can be displayed in the topology. 3. Only the devices in the same network and subnetwork can be displayed in the topology. 4. DHCP Diagnosis: only supports dynamic IP; the IP address of device can be recognized correctly only after four hours when its address pool range is changed. 5. When the downlink devices of EG5210-JP are offline, they still can be displayed in the topology for 1 hour, but the traffic information of interfaces cannot be displayed. 6. Loop detection is not supported. 7. RG-HS2310-16GH2GT1XS and RG-HA3515-DG are displayed in the Topology page only when the root node is RG-HS2310-16GH2GT1XS or when the RG-HS2310-16GH2GT1XS is directly connected to EG5210-JP. |
12 |
TOPOLOGY | The uplink ports of some switches cannot be shielded in the topology as the Cloud fails to identify them. Included: XS-S1930J-8GT2SFP, XS-S1930J-8GT2SFP-P XS-S1930J-18GT2SFP, XS-S1930J-18GT2SFP-P XS-S1930J-24GT4SFP/2GT, XS-S1930J-24GT4SFP/2GT-P XS-S1930J-48GT4SFP |
13 | Initial Configuration Template | The template can only be applied to AP180 series access points in Apartment networks. |
14 | CLI Commands | Only for AP and CAP series products. |
15 | WPA3-SAE | Only for MA2610 and MA2810 access points in hotel networks. |
16 | Device Details-Back Up | Only for apartment networks. |
17 | Network Management | Level 5 subnetwork group is supported. |
18 | Upgrade Policy | 1. Not supported in sub accounts and networks shared by another networks. 2. Only for MA and AP180 series access points. 3. Only one upgrade policy can be configured for a device model. |
19 | RG-HS2310-16GH2GT1XS | Ruijie JaCS doesn’t support displaying the configurations of G.hn ports as well as delivering configurations to them. |
20 | Project | Up to 200 projects can be created each time when you use the batch template to create projects. |
全部评论